CHEVY/GMC TRUCK AND SUV STEERING GEAR

$525.00

CHEVY/GMC TRUCK AND SUV STEERING GEAR

SKU: GMT800 Categories: , Tag:

Description

THIS CHEVY/GMC TRUCK AND SUV GEAR BOX THAT USES THE 3 MOUNTING BOLT TRIANGLE PATTERN IS AVAILABLE WITH MULTIPLE OPTIONS. BECAUSE OF THIS, IT IS BEST IF YOU CALL US TO MAKE SURE YOU GET THE GEAR BOX YOU NEED. WHEN CALLING, HAVE THE FOLLOWING INFORMATION:

PISTON BORE SIZE: THERE IS A CASTING NUMBER ON THE BOX. IF YOU HAVE AN 83 CASTING, IT IS A SMALL BORE (GMT400). IF YOU HAVE AN 84 CASTING, IT IS A BIG BORE (GMT800). MOST OF THE TIME: 1500 2X4, 1500 4X4 AND 2500 2X4 USE THE SMALL BORE AND 2500 4X4, AND 3500 2X4 OR 4X4 USE THE BIG BORE, BUT THERE ARE SOME EXCEPTIONS.

END CAP NUMBER: DIFFERENT MODELS OF VEHICLE HAVE DIFFERENT INTERNAL STOPS. THE NUMBER ON THE END CAP WILL LET US KNOW WHAT STOPS YOU NEED.

BLIND SPLINE: MOST VEHICLES USE A SECTOR SHAFT WITH 3 BLIND SPLINES, BUT SOME (USUALLY DIESELS) HAVE 4 BLIND SPLINES.

INPUT SHAFT: MOST VEHICLES BEFORE 2001 USE A SPLINED INPUT SHAFT. 2001 AND LATER USE A “DD” INPUT SHAFT.

Specs:

16:1 Variable Ratio

3 bolt  “V” mounting pattern

18mm Metric O-ring pressure fitting

16mm Metric O-ring return fitting

3/4-30 spline input shaft

Stock Valve Weight (Approx 20-25#)

It is highly recommended to modify the valve weight for any gearbox with a ratio faster than 17:1. Call to discuss valve weight options for your application, or read this link: Steering Feel Explained

Options:

CUSTOM VALVE WEIGHT: $100

14:1 Ratio: $100

BILLET END CAP: $40

BILLET TOP COVER w/NEEDLE BEARING: $90

3 BEARING KIT: $165 (Includes: Billet Top Cover w/needle bearing, mid bearing, bottom bearing, sleeve, o-ring and labor to bore housing)

-6 AN FITTINGS INSTALLED: $30

Offroad and 4X4 Options:

RAM ASSIST PORTS $95

OPEN PORT VALVE (required when adding ram ports) $95

 

Reviews

There are no reviews yet.

Be the first to review “CHEVY/GMC TRUCK AND SUV STEERING GEAR”

Your email address will not be published. Required fields are marked *