Phone: 661-568-9170   or   Fax: 661-885-8185

IMPORTANT NOTICE
Current lead times for Gearbox Builds is 3-4 weeks, and Pumps Builds is 1-2 weeks. Most other items are shipped within a day of order being received.

  • Saginaw 800/808 Gearbox For Jeeps & Small GM Trucks
  • Saginaw 800/808 Steering Gearbox For Jeeps & Small GM SUVs
  • Jeeps & GM Truck Saginaw 800/808 Steering Gearbox

Saginaw 800/808 Steering Gearbox For Jeeps & Small Sized GM Trucks/SUVs

1 review

IMPORTANT NOTE: There is a Core charge of $75 that is included in the price of this product. If you return your Core to us, we will refund a portion of this product total. The portion refunded will depend on the quality of Core you are delivering to us. View our core values and policies.

SHIPPING LABEL: We can usually supply a shipping label for approximately $25 (depending on your address) for you to send your core to us. Please call 661-568-9170 to arrange.


$ 695.00 plus $75.00 Core deposit

Total Price: 770.00

Quantity

Product Details

This is a Saginaw 800/808 gearbox that is found in many models of Jeeps and some GM small size pick up trucks (S-10). It came in multiple variations. When ordering you will need to know the following information:

3 or 4 Bolt Mounting Pattern

It is most commonly a 3 Bolt “L” mounting pattern, but some models of vehicles use a 4 Bolt “H” mounting pattern. The 3 bolt version is the same pattern, just missing one hole and will bolt right into place. The 4 bolt housings are becoming very rare, therefore they do cost more. Many customers opt to put a 3 bolt in place of the 4 bolt to save money.

Piston Bore Size

It is available in both a (Small Bore “70mm piston” and a Big Bore “80mm piston” depending on the make, model and year of the vehicle. Many Off-road Vehicles customers opt for the larger piston, especially when increasing tire size, because the larger piston gearbox will have more torque.

Ratio

We offer this gearbox in three ratios: 12:1, 14:1 and 16:1 Variable Ratio. Typically only full race off road vehicles will use a 12:1 ratio. Customers with daily drivers will usually go with the 14 or 16:1VR.

Specs

  • 18mm Metric O-ring pressure fitting
  • 16mm Metric O-ring return fitting
  • 3/4-30 input shaft

Options

  • Mounting Pattern: Choose 3 hole or 4 hole
  • Piston Bore: Choose small bore or big bore 
  • Ratio: Choose 16:1VR, 14:1 or 12:1
  • Valve Weight: Choose stock 25# or custom 30-35#
  • Billet End Cap
  • Billet Top Cover with Needle Bearing
  • 3 Bearing Kit: Includes Billet Top Cover w/needle bearing, mid bearing, bottom bearing, sleeve, o-ring and labor to bore housing
  • Ram Assist Ports: Includes open porting of valve to allow more flow that is needed when using a hydraulic ram
  • -6 AN Fittings Installed

Shipping

This product will be shipped between 5-7 business days from when order is placed.

SKU: GB-800-OR